The E4053 Threadlocker Medium Strength is designed for the locking and sealing of threaded fasteners, prevening loosening caused by vibrations. Our threadlocker is an anaerobic adhesive used on threaded metals that cures at room temperature in the absence of air.
- Cures without an activator
- Prevents leaks and the rusting of threads
- Fully cures in 24 hours
- Ideal for 5-20mm fasteners
- Torque break/prevail: 115/53
- Available in 5ml and 50ml bottles
Preparation
Protect work area. Parts to be sealed must be clean and dry. Shake the product thoroughly before use.
Note: To prevent the product from clogging in the nozzle, avoid touching the bottle tip to the metal surface.
Application
For Thru Holes: Apply several drops of the product onto the bolt at the nut engagement area.
For Blind Holes: Apply several drops of the product down the internal threads to the bottom of the hole.
Cleanup
Clean adhesive residue immediately with a damp cloth. Cured product can be removed with a combination of soaking in methylene chloride and mechanical abrasion such as a wire brush.
For disassembly, shear with standard hand tools and remove with methylene chloride. In rare instances where hand tools do not work because of excessive engagement length, apply localized heat to nut or bolt to approximately 482°F (250°C). Disassemble while hot.
If you can’t find the product you are looking for, need additional assistance or have any questions, please contact our sales team at (844) 424-0112 or e-mail us support@stainlessstairparts.com
We are happy to answer any questions you may have about our stair products, installation or help you place an order.
